Racewear guide · rally clothing layers
Rally clothing layers: fireproof underwear, race suits, gloves and boots
A race suit is only one layer. Under it sit fire-resistant underwear — a top, bottoms, socks and usually a balaclava — and you finish the set with gloves and boots. Together they are the clothing system most crews take to scrutineering.
This guide walks through that layered kit using the racewear Race and Rally stocks in Lisburn. It is a planning aid, not a rulebook. Always check your event's regulations and the homologation marked on the garment itself. For a suit-only buying overview, see our earlier rally suit buying guide.
1. FIA homologation basics
The FIA publishes the standards that motorsport protective clothing is tested against. On its technical lists, the current clothing standard is named FIA Standard 8856-2018 — Protective Clothing for Automobile Drivers. The same FIA pages still also list the earlier standard, FIA 8856-2000, under the same title.
Those technical lists are the official record of homologated equipment. Technical List n°74 is titled “Protective Clothing for Automobile Drivers Homologated according to the FIA Standard 8856-2018”. If you need to confirm a garment, that list — and the labels sewn into the clothing — are the place to look, rather than a retailer's product description alone.
Product pages in this guide are quoted as they stood on 17 November 2026. Where a page names a standard, we repeat that wording. We do not claim to have checked each item against Technical List n°74, and we do not say which standard a particular championship requires, or how long a homologation remains valid.
2. The layers at a glance
Race and Rally groups the clothing under racewear, with separate collections for underwear, suits, gloves and boots (the boot range is listed as race shoes; a /collections/race-boots address redirects there).
| Layer | What it usually includes | Collection | Homologation as stated on current product pages |
|---|---|---|---|
| Fireproof underwear / base layers | Top, bottoms, balaclava and socks | FIA underwear | Atech's 2025 Lightweight range is described as “meeting the latest FIA Homologations”. OMP First and One EVO underwear items on the same collection are listed as FIA 8856-2018. |
| Race suit | The outer overall worn over the base layers | Race suits | The OMP First-S and First EVO (my2025) suits are listed as FIA 8856-2018. |
| Race gloves | Gloves with a driving palm and a close wrist | Race gloves | The OMP First Racing Glove (my2025) and OMP EVO FX gloves are listed as FIA 8856-2018. The Atech Racing gloves, marked last sizes remaining, are listed as FIA 8856-2000. |
| Race boots | Thin-soled race shoes; optional overshoes in the wet | Race shoes | The Atech AT-S1 and OMP ONE EVO FX Leather shoes are listed as FIA 8856-2018. Sparco rubber overshoes in the same collection are described as sole protection for wet or abrasive surfaces, not as FIA clothing. |
3. Fireproof underwear and base layers
The base layers sit against the skin, under the suit. Race and Rally's FIA underwear collection currently carries Atech and OMP tops, bottoms, balaclavas and socks.
Atech's Lightweight range is described as new for 2025 and is sold in black or white, “meeting the latest FIA Homologations”. The pages do not name a specific standard number, so we have not added one here:
- The Atech Lightweight underwear top (product code TOP-LHT-B) is listed in sizes XS/S, M/L and XL/XXL.
- The matching Lightweight underwear bottoms use the same colour and size options.
- The Lightweight balaclava is listed as one size, in black or white.
- The Atech fireproof socks are listed in black, in Small (EU 38–39 / UK 5–5.5), Medium (EU 40–41 / UK 6.5–7) and Large (EU 42–43 / UK 8–9).
4. Race suits
The suit is the outer layer, worn over the underwear. This page is about how that suit sits in the clothing system, not a full comparison of every suit in the range — that suit-focused overview is in the rally suit buying guide.
The OMP First-S race suit (IA0-1828-E01) is described as an entry-level two-layer Nomex suit “meeting the very latest FIA Homologation”, with a soft inner layer and ultra-flat anti-rubbing seams. The product page lists the homologation as FIA 8856-2018.
A step on from that, the OMP First EVO race suit (my2025) is described as a modern two-layer suit with a hard-wearing but breathable outer layer, also listed as FIA 8856-2018. Both sit in the race suits collection.
5. Race gloves
Gloves complete the arm and hand covering. The race gloves collection is a useful place to look carefully at the standard printed on the page, because not every pair is listed to the same one.
The OMP First Racing Glove (my2025) (IB0-0776-B01) is described as a lightweight glove with an elastic band at the wrist, a straight-cut design, a silicon palm and external seams. The product page lists it to FIA 8856-2018. The higher-specified OMP EVO FX gloves are also listed as FIA 8856-2018, with a pre-curved shape and silicone palm zones.
By contrast, the Atech Racing gloves — marked last sizes remaining — are listed as FIA 8856-2000. They are described as fireproof gloves with external stitching, a silicone-based palm and an elasticated wrist. If your event specifies 8856-2018, do not assume a 8856-2000 glove will pass; check the regulations before you rely on remaining stock.
6. Race boots
Race and Rally lists boots in its race shoes collection. Two current examples have a named standard on the product page:
The Atech AT-S1 race shoe is listed as FIA 8856-2018 and described as a super-light shoe with a soft, perforated leather upper. The listing is marked last sizes remaining, so check availability before you plan around a particular size.
The OMP ONE EVO FX Leather shoe is also listed as FIA 8856-2018. The product page highlights an ultra-flat, thin outsole for pedal feel, a pivot-style heel and a leather ankle strap, in sizes 37–48 (UK 4–13).
If you are running in the wet, the same collection includes Sparco rubber overshoes, described as natural-rubber overshoes to protect the sole on wet or abrasive surfaces. They are a cover for the shoe, not a substitute for a homologated race boot.
A short checklist before you pack the bag
- Read the clothing rules in your event regulations, and in the Motorsport UK National Competition Rules if you are competing in the UK.
- Check the standard printed on each garment label, not only the product page, and confirm it is the one your event asks for.
- Pack the base layers as a set: top, bottoms, socks and a balaclava.
- Try the suit on over those base layers, not over ordinary clothes.
- Match the gloves and boots to the same standard the event requires — 8856-2018 and 8856-2000 are not interchangeable just because both are FIA standards.
- If an item is marked last sizes remaining, confirm the size is actually in stock before you travel.
- If anything is unclear, ask the organiser or call the shop before the event, not at scrutineering.
Product details and homologation wording summarised from raceandrally.com on 17 November 2026. Specifications, sizes and availability can change, so check the product page or call the shop before you order. Homologation claims in this guide are taken from those product pages; confirm them against the garment labels and the FIA technical lists. This page does not say which standard a given championship requires, or how long a homologation remains valid.